Savings on Clinker
The cost of SCM (Supplementary Cementitious Materials) is lower than the cost of clinker. By substituting SCM to clinker, the total cost of cement is reduced while boosting performance by use of ADOCEM®
Reduction of CO2 emissions
Co2 emission is caused by the calcinations of limestone (CaCO) during the clinker manufacturing process. As each ton of cement produced requires less clinker, CO, emissions are decreased. Therefore, CO, quotas can be respected, CO, taxes reduced or C/K ratio company target can be achieved
Significant reduction of production costs
The addition of ADOCEM results in improvement in clinker grinding efficiency. This allows for a shortened cement retention time in the mill which, in the end, leads to significant energy savings per ton of cement. ADOCEM can allow savings up to 20% Enerry consumption (Kwh/ton)
Reduction of maintenance costs
Shortened cement retention time in the mill leads to a less intensive use of the grinding system, therefore reducing mill maintenance cost per ton of cement. Moreover, the reduction of the mill media coating and the improvement of pack set prevent the mill stoppage due to blockage (caused by diaphragm and outlet grit cleaning, silo blockage)
Increase of productivity
ADOCEM has an impact on improving grinding mill efficiency as a result of which productivity can be increased up to +25%, without any additional energy consumption.
Fast truck loading and packing:
Pack-set improvement positively reduces interruptions due to blockage. Truck loading speed and packing are therefore improved thanks to better cement fluidity.